Pressure Transducers / Transmitters "  PT/SML     Sensor Type:  Measuring Principle:  Pressure Range:  Over Pressure:  Burst pressure:  Protection Class: Gauge and/or Absolute  Piezoresistive  -1 … +1 bar, 0 … 4000 bar  1.5 X  2 X  IP 65   Applications: q       Hydraulic Controls q       Pump and Compressors q       Pneumatic Controls q       Industrial Robots q       Off-road Vehicles q       Process Controls q       HVAC q       Water Management q       Petrochemicals   Features: Stainless Steel Diaphragm Poly-Si-SiO2-Layer Wetted components: 17-4 pH No O-rings, No Silicone Oil 4 to 20 mA (2 wire) Class: ± 0.25% Mixed signal ASIC conditioned. Vibration Proof EMI and ESD Proof     Description: The pressure transducer contains a minimum of components: the sensor element, one signal conditioning, ASIC and a power stage. The ASIC is a precision CMOS circuit with EPROM data storage utilizing an analog signal path with the extended temperature range for industrial and automotive applications. The electronic sensor calibration is performed by use of an in house designed test and calibration system which utilizes state of the art, electronic trimming technology and A/D converter controlled amplifiers based on switch capacitor technology. The stainless steel pressure port resists unfriendly media such as oil, diesel, fuel, waste water and other unfriendly liquids. Quality is strictly controlled according to ISO 9001 quality guidelines.       Electrical Characteristics:     Min. Typ. Max.   Span   16   mA Full scale output   20   mA Zero output   4   mA Total Accuracy   0.5   %FS* Response Time   1   ms Supply Voltage 10   32 Volt DC Loading     Vs - 10V/20mA   Insulation resistance at 50 V 100     MΩ * Total accuracy includes non - linearity, hysteresis, repeatability and temperature effects!   Environmental Data:     Temperature Operating:   -40 ~ +100˚C / 120˚C Temperature Operating:    -40 ~ +125˚C   Download PDF   PT / SML  | SiMF-20.0  |  SiFSS-34.0   top