High Melt Pressure Transducers "  HIGH TEMPERATURE MELT PRESSURE TRANSDUCER  ( HMPT)     HMPT series HIGH TEMPERATURE MELT PRESSURE TRANSDUCERS are for accurate and reliable measurement of pressure. It can be connected to digital display indicators. HMPT is the only transducer which is a straight substitute to MDA, PT, TPT, TDA series. It is available in three different types - Straight Barrel, Soft Barrel and special. It is most suitable for pressure measurement up to 400˚C. HMPT is widely used by PLASTIC, RUBBER, CHEMICAL, FIBRE and other industries. Application Process control Plastic industry Rubber industry Chemical industry Media Compatibility Fluids & gases compatible with 316L SS Range 0 –1500 Kg / cm2 Output 2.0 ~ 3.3 mV/V sensitivity options (4–20 mA, 0–5 /0–10 V DC) Input 10 –36 V DC /AC Temperature Range Upto +400ºC Max. Temp. at the end 70º C Typical Accuracy ± 0.5 ≈ 1% FS Notes Max. moment of force for installation   40 N.M.     Maximum Diaphragm Temperature 400˚C [750˚F] Maximum Electronic Housing Temperature 70˚C [160˚F] Choice of Pressure Range 1500 bar [max.] Internal Shunt Calibration 80% Analog Output (On Request)   Specifications:   Rated Pressure 0....100, 150,200, 250, 300, 350, 400, 500, 600, 700, 1000, 1500 Bar Sensitivity 1.5, 2, 3, 3.3 mV /V Accuracy ≤ 1.5 % FS Zero Balance ≤ ± 1 mV Output Impedance 350 ± 35 Ω Insulation Resistance 500 M Ω (@ 100 V DC) Recommended Excitation 6 - 12 V DC Max. Process Temperature 400 ˚C Max. Electronic Housing Temperature 70 ˚C Max. Moment of force for Installation 40 NM Safe Overload 150 % FS   Outline dimensions (MM): Wiring Code:       D1 D2 D3 D4 D5 A B C SW α HMPT-A   ø 7.7 ø 12 ø 12 ø 13 6.4 12 20 19 45 HMPT-B   ø 7.8 ø 16 ø 16 ø 17 6.4 12 20 19 45 HMPT-C   ø 7.7 ø 10.4 ø 10.4 ø 13 6 12 16 19 45 HMPT-D   ø 7.7 ø10.5 ø 11 ø 13 6.4 12 30 19 45 HMPT-E   ø 10 - ø 16 ø 17 10.4 10.4 22 19 0 HMPT-F   ø 16 - ø 16 ø 17 10.4 10.4 22 19 0 HMPT-G   ø 18 ø24 ø 23.5 ø 23.5 12.4 16 44 24 0   Download PDF   HMPT | HMPT - S | HMPT - A   top