|
 |
| |
|
|
|
 |
| |
| |
| |
|
ABSTRACT OF TEST
REPORT FROM
"THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA" PUNE. |
| |
|
(Full report available for inspection in our office) |
|
There was an improvement in the fuel consumption in the range
of 3.7 to 11.1%, when fuel & lube oil additives were employed. |
| |
|
Emissions
were reduced with the use of fuel & lube oil additives, as
follows:
|
-
NOX : 24.2% reduction with
fuel additive, 22.6% reduction with fuel & lube oil
additives.
|
-
CO : 43.5% reduction with
fuel additive, 52.5% reduction with fuel & lube oil
additives.
|
-
HC : 12.7% reduction with
fuel additive, 41.2% reduction with fuel & lube oil
additives.
|
|
Wear and
Tear |
-
After completion of the
test, changes in mass of engine valves were negligible.
|
-
No scar mark, scratch mark
were found visually on engine valves and piston bowl.
|
| |
|
| |
| |
|
ABSTRACT OF TEST
REPORT
AS PER IS : 1460/PVT/CIRT-CSD1158), DIESEL WITH ADDITIVE,
FROM CENTRAL INSTITUTE OF ROAD TRANSPORT, PUNE |
|
|
|
|
|
Sr.
No. |
Test
Description |
Requirement |
Actual Test Results |
|
1. |
Ash, Percent by Mass (Max.) |
0.01 |
0.005 |
|
2. |
Cetane Index (Min.) |
46 |
53 |
|
3. |
Copper Strip
Corrosion for 3 hrs at 100ºC |
Material should be free from girt,
suspended matter and other visible impurities. |
Conforms |
|
4. |
Flash Point Abel, C (Min.) |
35ºC |
64 |
|
5. |
Kinematic Viscosity,
Cst at 40ºC |
2.0 to 5.0 |
3.47 |
|
6. |
Total Sulphur, Percent by Mass
(Max.) |
0.25 |
0.02 |
|
|
|
|
|
|
|
